About our Hardwood tiles
Mirth Studio utilizes the latest advances in printing and screening combined with a proprietary sealing process to make wood tiles that are able to stand up to years of abuse. Our tiles are as durable or even more durable than any engineered wood flooring product on the market.
Mirth Studio Hardwood Tiles
WE ARE THE ONLY COMPANY IN THE WORLD MAKING THIS TYPE OF PRODUCT.
- Our tiles are easily installed right over plywood or concrete—no sanding, staining or sealing.
- They can be glued down on a level subfloor or installed as a floating floor and can be removed ( link to installation)
- They are pre finished saving on time and money!
- Our engineered hardwood won’t warp or buckle like typical strip wood flooring.
- Our tiles are completely customizable. Whatever design you can think of we can make into a tile!
Here is some basic info:
Our tiles are proudly manufactured in the USA using the highest quality, precision-milled engineered hardwood. We use the finest equipment available and cutting edge technology to ensure a superior quality product that you can feel comfortable knowing will last for many years.
They are pre-finished with a commercial strength industrial finish, that will not Peel, Yellow, Fade or chip come with a 15 year residential finish warranty, a 5 year commercial finish warranty and a lifetime structural warranty. If the finish was to scratch a single tile can be replaced or the finish can be refreshed using a compatible product such as Bona traffic
Each tile is 12” x 12” squares (each tile is 1 square foot) ½” thick
Mirth Tiles are designed using a tongue and groove construction that holds them in place and adds stability.
If you would like further protection for your floors for very high traffic areas we recommend using Bona Traffic (please see specifics in installation section) which can be applied over your floors for added protection.
OUR ENVIRONMENTAL CONSCIENCE
--Our tiles use less hard wood than solid hardwood flooring. We use only small wear-layer of hardwood on the top and bottom of the tile.
--Only hardwood species that are in abundant supply in the US – oak and maple – are used in Mirth Studio tiles.
-- Our UV cured finish emits no VOCs
When ordering Mirth Tiles, please keep in mind that because wood is a natural product no two will be exactly alike. We think this adds to the beauty of the floors and gives them character not found in other types of manufactured tiles. Sometimes the variation is more obvious and for this reason we recommend ordering a 5% overage in case some of the tiles do not meet with your approval.
The tiles are designed to be installed with cross grains and due to the tongue and groove construction, this cannot be changed. Depending on the color of the tile it may be more obvious than others. Lighter color tiles show more grain than the darker colors.
We go to great lengths to send only tiles that meet our high standards but it is important to understand that wood does sometime have flaws. Sometimes the edges are rougher than others but that is because the nature of wood and not considered a defect. If you feel you have received a defective tile, please contact immediately and we will send out a replacement.